- Woodworking Store
- >
- Power Tool Accessories
- >
- Router Accessories
- >
- Specialty Router Accessories
- >
- The Keller Dovetail System - Journeyman Model 1500 - 15 inch
The Keller Dovetail System - Journeyman Model 1500 - 15 inch
SKU:
$38.00
6
159
$6.00 - $159.00
Unavailable
per item
Designed for joining smaller projects like cabinets, drawers, jewelry boxes, and gift items. The double sided template comes with two router bits each with shank mounted bearings, andinstructions.
All models include:
A. Precision templates (one double sided type for journeyman models - two single sided type for professional models).
B. Two carbide-tipped router bits (standard dimensions)... One dovetail bit and one straight cutting bit.
C. Two ball bearing template guides mounted on each router bit shank.
D. Fully illustrated instruction manual.
Each template requires a simple wooden backing block (not included)
Wood Width Capacity:……………….. Unlimited
Length of Templates:…………………………… 15″
Wood Thickness Capacity:………………..1/8″-3/4″
-with Rabbeted Pins:……………………..Up to 1″
Dovetail Angle:……………………. 7 degree (8:1)
Pin Spacing, center to center:………………. 11/8″
Minimum Router hp Required:……………. 3/4 hp
Router Collet Size Required:…………………. 1/4″
Shipping Weight:……………………………….2 lbs
Spend Less Time Adjusting Tools
Engineered for simplicity, the Keller Dovetail System is easy to get started.
Just clamp the Keller Dovetail Templates to your workpiece, pick up your router, and start cutting. In only 2 to 5 minutes you'll cut both halves of a dovetail joint.
The results will be clean, precise, and snug fitting, with beautiful hand-cut proportions
Cut any width stock, and work with different wood thicknesses easily…
All models give you through-dovetail joints in any width stock.
Unlike other jigs, there are no built-in stops to limit the width of your work. If your work is wider than your templates, simply slide the templates along and continue cutting.Keller gives you a consistently tight dovetail joint regardless of the wood thickness or the router bit setting.
Other jigs require time-wasting readjustments and test cuts every time you change your wood thickness. In addition, you can join wood of the same or different thicknesses with the same setup.
For Production Runs or Unique Heirlooms…
Classic or avant-garde project, Keller gives you strength, beauty, and speed.
Each model has preset spacing especially designed in the classic proportions of hand cut dovetails.
A. Precision templates (one double sided type for journeyman models - two single sided type for professional models).
B. Two carbide-tipped router bits (standard dimensions)... One dovetail bit and one straight cutting bit.
C. Two ball bearing template guides mounted on each router bit shank.
D. Fully illustrated instruction manual.
Each template requires a simple wooden backing block (not included)
Wood Width Capacity:……………….. Unlimited
Length of Templates:…………………………… 15″
Wood Thickness Capacity:………………..1/8″-3/4″
-with Rabbeted Pins:……………………..Up to 1″
Dovetail Angle:……………………. 7 degree (8:1)
Pin Spacing, center to center:………………. 11/8″
Minimum Router hp Required:……………. 3/4 hp
Router Collet Size Required:…………………. 1/4″
Shipping Weight:……………………………….2 lbs
Spend Less Time Adjusting Tools
Engineered for simplicity, the Keller Dovetail System is easy to get started.
Just clamp the Keller Dovetail Templates to your workpiece, pick up your router, and start cutting. In only 2 to 5 minutes you'll cut both halves of a dovetail joint.
The results will be clean, precise, and snug fitting, with beautiful hand-cut proportions
Cut any width stock, and work with different wood thicknesses easily…
All models give you through-dovetail joints in any width stock.
Unlike other jigs, there are no built-in stops to limit the width of your work. If your work is wider than your templates, simply slide the templates along and continue cutting.Keller gives you a consistently tight dovetail joint regardless of the wood thickness or the router bit setting.
Other jigs require time-wasting readjustments and test cuts every time you change your wood thickness. In addition, you can join wood of the same or different thicknesses with the same setup.
For Production Runs or Unique Heirlooms…
Classic or avant-garde project, Keller gives you strength, beauty, and speed.
Each model has preset spacing especially designed in the classic proportions of hand cut dovetails.