Keller Dovetail System - Professional Model 2401- 24 inch
SKU:
$369.00
$6.00 - $332.10
$332.10
On Sale
per item
The midsize Keller dovetail system model that was designed for furniture, cabinets, and casegoods. Comes with two aluminum templates, two router bits each with shank mounted bearings, and an instruction booklet.
All models include:
A. Precision templates (one double sided type for journeyman models - two single sided type for professional models).
B. Two carbide-tipped router bits (standard dimensions)... One dovetail bit and one straight cutting bit.
C. Two ball bearing template guides mounted on each router bit shank.
D. Fully illustrated instruction manual.
Each template requires a simple wooden backing block (not included)
Wood Width Capacity:……………….. Unlimited
Length of Templates:…………………………… 24″
Wood Thickness Capacity:……………….. 1/4″-1″
-with Rabbeted Pins:………………….. Up to 11/2″
Dovetail Angle:……………………. 7 degree (8:1)
Pin Spacing, center to center:………………. 13/4″
Minimum Router hp Required:………….. 11/4 hp
Router Collet Size Required:…………..1/2″ or 3/8″
Shipping Weight:……………………………….8 lbs
Spend less time adjusting tools.
Engineered for simplicity, the Keller dovetail System is easy to get started.
Just clamp the dovetail templates to your workpiece, pick up your router, and start cutting.
In 2 to 5 minutes you'll cut both halves of a dovetail joint.
The results will be clean, precise, and snug fitting, with beautiful hand-cut proportions.
Lets you cut any width stock, and vary wood thicknesses easily…
All models give you through-dovetail joints in any width stock.
No built-in stops to limit the width of your work. If your work is wider than your templates, just slide the templates along and continue cutting.
Keller gives you a consistently tight dovetail joint regardless of the wood thickness or the router bit setting.
A. Precision templates (one double sided type for journeyman models - two single sided type for professional models).
B. Two carbide-tipped router bits (standard dimensions)... One dovetail bit and one straight cutting bit.
C. Two ball bearing template guides mounted on each router bit shank.
D. Fully illustrated instruction manual.
Each template requires a simple wooden backing block (not included)
Wood Width Capacity:……………….. Unlimited
Length of Templates:…………………………… 24″
Wood Thickness Capacity:……………….. 1/4″-1″
-with Rabbeted Pins:………………….. Up to 11/2″
Dovetail Angle:……………………. 7 degree (8:1)
Pin Spacing, center to center:………………. 13/4″
Minimum Router hp Required:………….. 11/4 hp
Router Collet Size Required:…………..1/2″ or 3/8″
Shipping Weight:……………………………….8 lbs
Spend less time adjusting tools.
Engineered for simplicity, the Keller dovetail System is easy to get started.
Just clamp the dovetail templates to your workpiece, pick up your router, and start cutting.
In 2 to 5 minutes you'll cut both halves of a dovetail joint.
The results will be clean, precise, and snug fitting, with beautiful hand-cut proportions.
Lets you cut any width stock, and vary wood thicknesses easily…
All models give you through-dovetail joints in any width stock.
No built-in stops to limit the width of your work. If your work is wider than your templates, just slide the templates along and continue cutting.
Keller gives you a consistently tight dovetail joint regardless of the wood thickness or the router bit setting.
