All models include:
A. Precision templates (one double sided type for journeyman models - two single sided type for professional models).
B. Two carbide-tipped router bits (standard dimensions)... One dovetail bit and one straight cutting bit.
C. Two ball bearing template guides mounted on each router bit shank.
D. Fully illustrated instruction manual.
Each template requires a simple wooden backing block (not included)
The first in the Keller dovetail system; it has proven its accuracy and durability since 1976.
Its operation and simplicity have given birth to thousands of pieces of great furniture and casework. The 36'' wide templates will handle stock from 1/2'' to 1 1/4'' thick, of unlimited width and length.
The standard bit set supplied can be used in stock up to 1'' thick; the optional large and small bit sets extend the range of these versatile tools.
Like all templates in the Pro Series, the 3600 is machined from heavy duty 1/2'' aluminum alloy tooling plate and is warranted by the manufacturer for 20 years. Made in the USA.
Template width: 36''
Thickness range:
Standard Bits: 5/8'' to 1''
Small Bits: 1/2'' to 3/4''
Large Bits: 7/8'' to 1 1/4''
Stock Width: Unlimited
Stock Length: Unlimited
Dovetail Angle: 14°
Normal pin spacing:
3'' center to center
Router required:
1 1/2+ Hp
Collet: 1/2''
Shipping Weight:……………………………….13 lbs
INCLUDES:
2 precision, 36'' long templates, one each for dovetails and pins (unlimited width capacity)
2 router bits, carbide-tipped, industrial quality
1 dovetail bit (14°) with guide bearing (#3637)
1 straight bit with guide bearing (#3645)
(for stock 5/8'' to 1'' thick)
1 3/8''–1/2'' collet adaptor (#3625)
1 set mounting screws
1 instruction manual
Each template requires a simple wooden backing block, (not included).
Spend less time adjusting tools.
Engineered for simplicity, the Keller dovetail system is easy to get started.
Just clamp the Keller dovetail templates to your workpiece, pick up your router, and start cutting. In only 2 to 5 minutes you'll cut both halves of a dovetail joint.
The results will be clean, precise, and snug fitting, with beautiful hand-cut proportions.
Lets you cut any width stock, and vary wood thicknesses easily.
All models give you through-dovetail joints in any width stock.
No built-in stops to limit the width of your work. If your work is wider than your templates, just slide them along and continue cutting.
A. Precision templates (one double sided type for journeyman models - two single sided type for professional models).
B. Two carbide-tipped router bits (standard dimensions)... One dovetail bit and one straight cutting bit.
C. Two ball bearing template guides mounted on each router bit shank.
D. Fully illustrated instruction manual.
Each template requires a simple wooden backing block (not included)
The first in the Keller dovetail system; it has proven its accuracy and durability since 1976.
Its operation and simplicity have given birth to thousands of pieces of great furniture and casework. The 36'' wide templates will handle stock from 1/2'' to 1 1/4'' thick, of unlimited width and length.
The standard bit set supplied can be used in stock up to 1'' thick; the optional large and small bit sets extend the range of these versatile tools.
Like all templates in the Pro Series, the 3600 is machined from heavy duty 1/2'' aluminum alloy tooling plate and is warranted by the manufacturer for 20 years. Made in the USA.
Template width: 36''
Thickness range:
Standard Bits: 5/8'' to 1''
Small Bits: 1/2'' to 3/4''
Large Bits: 7/8'' to 1 1/4''
Stock Width: Unlimited
Stock Length: Unlimited
Dovetail Angle: 14°
Normal pin spacing:
3'' center to center
Router required:
1 1/2+ Hp
Collet: 1/2''
Shipping Weight:……………………………….13 lbs
INCLUDES:
2 precision, 36'' long templates, one each for dovetails and pins (unlimited width capacity)
2 router bits, carbide-tipped, industrial quality
1 dovetail bit (14°) with guide bearing (#3637)
1 straight bit with guide bearing (#3645)
(for stock 5/8'' to 1'' thick)
1 3/8''–1/2'' collet adaptor (#3625)
1 set mounting screws
1 instruction manual
Each template requires a simple wooden backing block, (not included).
Spend less time adjusting tools.
Engineered for simplicity, the Keller dovetail system is easy to get started.
Just clamp the Keller dovetail templates to your workpiece, pick up your router, and start cutting. In only 2 to 5 minutes you'll cut both halves of a dovetail joint.
The results will be clean, precise, and snug fitting, with beautiful hand-cut proportions.
Lets you cut any width stock, and vary wood thicknesses easily.
All models give you through-dovetail joints in any width stock.
No built-in stops to limit the width of your work. If your work is wider than your templates, just slide them along and continue cutting.
